FixVault
Home › Hyundai › 2011 › Genesis 3.8 › Repair and Diagnosis › Body & Frame › Door Locks › Smart Key System › Inspection › Antenna Status Check

Antenna Status Check

  1. Connect the cable of scan tool to the data link connector in driver side crash pad lower panel.
  2. Select the "IPM + PIC".
  3. After IG ON, select the "PIC ANTENNA STATUS CHECK".
    Fig 1: Scan Tool Display - Select "Pic Antenna Status Check"
    G06103692Courtesy of HYUNDAI MOTOR CO.
  4. Set the smart key near the related antenna and operate it with a scanner.
    Fig 2: Scan Tool Display - Bumper Antenna
    G06103693Courtesy of HYUNDAI MOTOR CO.
    Fig 3: Scan Tool Display - Pic Antenna Status Check
    G06103694Courtesy of HYUNDAI MOTOR CO.
  5. If the smart key runs normal, the related antenna, smart key (transmission, reception) and exterior receiver are normal.
  6. Antenna status
    1. INTERIOR ANTENNA 1
    2. INTERIOR ANTENNA 2
    3. BUMPER/TRUNK ANTENNA
    4. DRV_DR ANTENNA
    5. AST_DR ANTENNA
    6. REAR PACKAGE TRAY ANTENNA
About FixVault