Check parking position switch status
- Connect scantool with diagnostic connector.
- Check current data with scantool.
- Check "Shift lever P position" parameter on current data.
- Check that data is appropriately changeable according to the shift lever position in P or others.
Specification: P position : ON, Not in P position : OFF.
- Is the shift lever P position normal?
YES
- Check poor connection between harness connector and Parking Position switch or IPM : Thoroughly check the looseness, poor connection, bent, corrosion, contamination, deformation or damage of connector. Repair or replace as necessary and then, go to "VERIFICATION OF VEHICLE REPAIR " procedure.
NO
- Go to Inspection & Repair procedure.