FixVault
Home › Hyundai › 2011 › Genesis 4.6 › Repair and Diagnosis › Body & Frame › Windows › Interior Trim › Crash Pad › Replacement › Audio Assembly Replacement

Audio Assembly Replacement

  1. Remove the crash pad side cover.
  2. Remove the lower panel.
  3. Remove the cluster fascia panel.
  4. Remove the crash pad side garnish.
  5. Remove the center fascia panel.
  6. After loosening the audio assembly mounting screws, then remove the audio assembly (A).
  7. Disconnect the connectors (B).
    Fig 1: Identifying Audio Assembly And Connectors With Audio Assembly Mounting Screws
    G06103389Courtesy of HYUNDAI MOTOR CO.
  8. Installation is the reverse of removal.
    NOTE:
    • Make sure the connector is plugged in property.
About FixVault