Repair Procedures: Removal

Disconnect the battery negative cable and wait for at least three minutes before beginning work.
Remove the airbag module mounting bolts (2EA).

Fig 1: Identifying Airbag Module Mounting Bolts
Courtesy of HYUNDAI MOTOR CO.
Disconnect the horn connector (A).

Fig 2: Identifying Horn Connector, Wiring Fixing Clip, & Airbag Module Connectors

Courtesy of HYUNDAI MOTOR CO.

Remove the wiring fixing clip (C) and disconnect airbag module connectors (B).
Separate the airbag module from the steering wheel.
CAUTION: The removed airbag module should be stored in a clean, dry place with the pad cover face up.
Remove the steering wheel and steering wheel column cover. (Refer to STEERING COLUMN & SHAFT )

Fig 3: Removing Steering Wheel & Steering Wheel Column Cover
Courtesy of HYUNDAI MOTOR CO.
Disconnect the clock spring and horn connector, then remove the clock spring.

Fig 4: Identifying Clock Spring & Horn Connector
Courtesy of HYUNDAI MOTOR CO.