Repair procedures: Removal

NOTE: In the case of the vehicle equipped with immobilizer or button engine start system, perform "Key Teaching" procedure together. (Refer to TEACHING PROCEDURES .)

Turn ignition switch OFF and disconnect the negative (-) battery cable.
Disconnect the ECM Connector (A).

Fig 1: Identifying ECM Connector
Courtesy of HYUNDAI MOTOR CO.
Remove the air cleaner assembly. (Refer to INTAKE AND EXHAUST SYSTEM .)
Remove the mounting bolts (A), and then remove the ECM (B).

Fig 2: Identifying ECM With Mounting Bolts
Courtesy of HYUNDAI MOTOR CO.