FixVault
Home › Hyundai › 2011 › Santa Fe SE, AWD › Repair and Diagnosis › Body & Frame › Windows › Interior › Crash Pad › Repair procedures › Replacement › Lower Panel Replacement

Lower Panel Replacement

  1. Remove the crash pad side cover.
  2. Remove the switch assembly (A).

    [LHD] 

    Fig 1: Identifying Switch Assembly (LHD)
    G06844545Courtesy of HYUNDAI MOTOR CO.

    [RHD] 

    Fig 2: Identifying Switch Assembly (RHD)
    G06844546Courtesy of HYUNDAI MOTOR CO.
  3. Loosen the mounting screw, remove the lower panel (B).
  4. Disconnect the connector (A).

    [LHD] 

    Fig 3: Identifying Lower Panel With Connector (LHD)
    G06844547Courtesy of HYUNDAI MOTOR CO.

    [RHD] 

    Fig 4: Identifying Lower Panel With Connector (RHD)
    G06844548Courtesy of HYUNDAI MOTOR CO.
  5. Remove the reinforcing panel (A).
    Fig 5: Identifying Reinforcing Panel
    G06844549Courtesy of HYUNDAI MOTOR CO.
  6. Installation is the reverse of removal.
About FixVault