Repair Procedures: Removal

[Bank 1/Intake] 

1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2. Remove the OTS (A).
3. Disconnect the CVVT oil control valve connector (B).
4. Remove the installation bolt (C), and then remove the valve from the engine.
   Fig 1: Identifying OTS, CVVT Oil Control Valve Connector And Installation Bolt

   Courtesy of HYUNDAI MOTOR CO.

[Bank 1/Exhaust] 

1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2. Disconnect the CVVT oil control valve connector (A).
3. Remove the installation bolt (B), and then remove the valve from the engine.
   Fig 2: Identifying CVVT Oil Control Valve Connector And Installation Bolt

   Courtesy of HYUNDAI MOTOR CO.