FixVault
Home › Hyundai › 2011 › Sonata Limited, 2.0 B › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 2.0L - Except HEV › Manifold Absolute Pressure Sensor (Maps) › Repair Procedures › Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the manifold absolute pressure sensor connector (A).
  3. Remove the installation bolts (B), and then remove the sensor from the surge tank.

    [MAPS #1] 

    Fig 1: Identifying Manifold Absolute Pressure Sensor Connector And Installation Bolts (MAPS #1)
    G07365365Courtesy of HYUNDAI MOTOR CO.

    [MAPS #2] 

    Fig 2: Identifying Manifold Absolute Pressure Sensor Connector And Installation Bolts (MAPS #2)
    G07365366Courtesy of HYUNDAI MOTOR CO.
About FixVault