FixVault
Home › Hyundai › 2011 › Tucson GL, Automatic › Repair and Diagnosis › Brakes › Traction Control › Electronic Stability Control System › DBC Switch › Repair procedures › Inspection

Repair procedures: Inspection

  1. Turn ignition switch OFF and disconnect the negative (-) battery cable.
  2. Remove the crash pad side switch assembly.
    Fig 1: Identifying Crash Pad Side Switch Assembly
    G06874587Courtesy of HYUNDAI MOTOR CO.
  3. Check the continuity between the switch terminals as the DBC switch is engaged.
    Fig 2: DBC Switch Terminals Continuity Chart
    G06874588Courtesy of HYUNDAI MOTOR CO.
About FixVault