FixVault
Home › Hyundai › 2012 › Accent GLS, Standard Trans › Repair and Diagnosis › Engine Performance › Fuel Delivery › Fuel Delivery System › Accelerator Pedal › Repair Procedures › Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the negative (-) battery cable.
  2. Disconnect the accelerator position sensor connector (A).
  3. Remove the installation nuts (B), and then remove the accelerator pedal module.
    Fig 1: Identifying Accelerator Position Sensor Connector And Installation Nuts
    G08804539Courtesy of HYUNDAI MOTOR AMERICA
About FixVault