FixVault
Home › Hyundai › 2012 › Azera › Repair and Diagnosis › Heating, Ventilation & A/C (HVAC) › HVAC Control Systems › Heater System › Mode Control Actuator › Repair Procedures › Replacement

Repair Procedures: Replacement

  1. Disconnect the negative (-) battery terminal.
  2. Remove the crash pad left side cover (A).
    Fig 1: Identifying Crash Pad Left Side Cover
    G08814815Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the extension cover (A).
    Fig 2: Identifying Extension Cover
    G08814816Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the fuse box cover (A).
    Fig 3: Identifying Fuse Box Cover
    G08814817Courtesy of HYUNDAI MOTOR AMERICA
  5. Remove the crash pad lower cover (A).
    Fig 4: Identifying Crash Pad Lower Cover
    G08814818Courtesy of HYUNDAI MOTOR AMERICA
  6. Disconnect the diagnosis connector (A) and then remove the crash pad lower cover.
    Fig 5: Identifying Crash Pad Lower Cover And Diagnosis Connector
    G08814819Courtesy of HYUNDAI MOTOR AMERICA
  7. Remove the shower duct (A).
    Fig 6: Identifying Shower Duct
    G08814820Courtesy of HYUNDAI MOTOR AMERICA
  8. Disconnect the mode control actuator connector (A).
    Fig 7: Identifying Mode Control Actuator And Connector
    G08814821Courtesy of HYUNDAI MOTOR AMERICA
  9. Loosen the mounting screw and then remove the mode control actuator (B).
  10. Installation is the reverse order of removal.
About FixVault