FixVault
Home › Hyundai › 2012 › Elantra GLS, Automatic Trans › Repair and Diagnosis › Engine Performance › System › Engine Control System Diagnosis (2 Of 2) › DTC P0606: ECM/PCM Processor › General Information › DTC Detecting Condition

General Information: DTC Detecting Condition

DTC DETECTING CONDITION

Item Detecting Condition Possible Cause
DTC Strategy
  • Controller malfunction check failure of controller operation
  1. Poor connection or damaged harness
  2. Unstable Power
  3. Faulty PCM
Enable Conditions
  • 10V < Battery voltage > 16V
  • Sensor heater controller active
Threshold Value
  • Error bit information from H/W circuit
Diagnostic Time
  • 5 sec.
MIL On Condition
  • 2 Driving Cycles
About FixVault