General Information: DTC Detecting Condition

DTC DETECTING CONDITION

Item	Detecting Condition	Possible Cause
DTC Strategy	Engine is in Limp-Home mode	ETC system malfunction (Additional DTC when APS (Accel. Position Sensor)error or ETC hardware check error (P2101, 2118) or TPS start check adaptation (P2119, P0638) or TPS reference voltage (P0652, P0653) or APS reference voltage (P0642, P0643, P0698, P0699) or APS ratio error (P2138) or both TPS1 and TPS2 error or Level 2 monitoring error detected.)
Enable Conditions	The PCM detects ETC system malfunction.
Threshold Value	-
Diagnostic Time	-