FixVault
Home › Hyundai › 2012 › Elantra GLS, Automatic Trans › Repair and Diagnosis › Steering › Power Steering › Motor Driven Power Steering System › MDPS Assembly › Repair Procedures › Disassembly › Key lock assembly

Key lock assembly

  1. Make a groove on the head of special bolts (A) by a punch.
    Fig 1: Identifying Key Lock Assembly Bolts
    G07256384Courtesy of HYUNDAI MOTOR CO.
  2. Loosen the special bolt using a screw driver and then remove the key lock assembly from the steering column assembly.
  3. Reassembly is the reverse of the disassembly.
About FixVault