FixVault
Home › Hyundai › 2012 › Elantra Touring GLS, Automatic Trans › Repair and Diagnosis › External Pages › Different car › Section 19 (Automatic Transaxle Control System) › Inhibitor Switch › Removal

Inhibitor Switch: Removal

WARNING: This page is about a different car, the 2011 Hyundai Elantra Touring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the battery terminal.
  2. Remove the battery and battery tray.
  3. Remove the air duct.
  4. Remove the air cleaner assembly. (Refer to REMOVAL )
  5. Disconnect the inhibitor switch connector (A).
    Fig 1: Identifying Inhibitor Switch Connector
    G05364287Courtesy of HYUNDAI MOTOR CO.
  6. Remove the control cable (A) from the manual control lever.
    Fig 2: Identifying Control Cable And Manual Control Lever
    G05364288Courtesy of HYUNDAI MOTOR CO.
  7. Remove the inhibitor switch and manual control lever.
About FixVault