Throttle Position Sensor (TPS): Inspection
WARNING: This page is about a different car, the 2011 Hyundai Elantra Touring. However, it is still accessible from the selected car via links, so may be relevant.
- Connect a scan tool on the Data Link Connector (DLC).
- Start engine and check output voltages of TPS at C.T and W.O.T.
- Turn ignition switch OFF and disconnect the scan tool from the DLC.
- Disconnect TPS connector and measure resistance between TPS terminals 2 and 3.
Specification: Refer to "SPECIFICATION "
Specification: Refer to "SPECIFICATION "