FixVault
Home › Hyundai › 2012 › Equus Signature › Repair and Diagnosis (Single Page) › Accessories & Equipment › Drivers Assistance Systems - ADAS › Front Back View Camera System › Front Back View Camera System › Repair procedures › Removal › Back View Camera

Back View Camera

  1. Remove the screws, clip and trunk lid trim in the trunk. (Refer to the Trunk Lid )
  2. Remove the trunk lid panel.
  3. Remove the back view camera (B) after removing the connector (A) and screws (2EA).
    Fig 1: Identifying Back View Camera Connector
    G08831849Courtesy of HYUNDAI MOTOR AMERICA
    Fig 2: Identifying Back View Camera
    G08831850Courtesy of HYUNDAI MOTOR AMERICA
About FixVault