FixVault
Home › Hyundai › 2012 › Equus Signature › Repair and Diagnosis › Body & Frame › Exterior Body Panels › Power Trunk Module › Power Striker › Repair procedures › Removal

Repair procedures: Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the trunk trim in the trunk. (Refer to the Trunk Lid )
  3. Disconnect the power striker connector (A).
    Fig 1: Identifying Power Striker Connector
    G08831640Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the power striker (A) after removing the screws.
    Fig 2: Identifying Power Striker And Mounting Screws
    G08831641Courtesy of HYUNDAI MOTOR AMERICA
About FixVault