Repair procedures: Inspection

Turn ignition switch OFF and disconnect the negative (-) battery cable
Remove the crash pad side cover.

Fig 1: Identifying Crash Pad Side Cover
Courtesy of HYUNDAI MOTOR AMERICA
Remove the lower panel. (Refer to the Crash Pad )

Fig 2: Identifying Crash Pad Lower Panel
Courtesy of HYUNDAI MOTOR AMERICA
Remove the lower crash pad switch assembly by using the scraper and then disconnect the connectors.

Fig 3: Identifying Lower Crash Pad Switch Assembly
Courtesy of HYUNDAI MOTOR AMERICA
Check the continuity between the switch terminals as the ESC OFF switch is engaged.

Fig 4: Identifying Switch Connector Terminals
Courtesy of HYUNDAI MOTOR AMERICA