FixVault
Home › Hyundai › 2012 › Equus Signature › Repair and Diagnosis › Brakes › Traction Control › Electronic Stability Control (ESC) System › Front Wheel Speed Sensor › Repair procedures › Removal

Repair procedures: Removal

  1. Remove the connector (A) after removing the front wheel speed sensor clip.
    Fig 1: Identifying Front Wheel Speed Sensor Connector
    G08833104Courtesy of HYUNDAI MOTOR AMERICA
  2. Remove the front wheel speed sensor. (Refer to Front Hub/Knuckle/Tone Wheel )
  3. Installation is the reverse of removal.
About FixVault