| DTC Strategy |
- Check Stop Switch "ON" by the voltage level (Below 2V)
- Check the vehicle speed signal from CLU (2MPH_3km/h)
- IGN ON
|
- Check Stop Signal Input state (ON/OFF)
|
| Enable Conditions |
- Button Start Vehicle (Option)
- IG ON
- Stop Switch: ON
- Vehicle speed: above 2MPH (3km/h)
|
| Threshold Value |
- Stop Signal Input ON: Below 2V
- Stop Signal Input OFF: Above 7V
|
| Diagnostic Time |
- Stop Switch is "ON" for 10sec and above under IG ON and the vehicle speed is over 2MPH (3km/h).
|
| DTC Erasing Time |
- IG OFF
- Stop Signal Input: OFF
- Vehicle speed: Below 2MPH (3km/h) (* DTC is erased immediately when the vehicle condition meet to 1 condition among above 3.)
|