FixVault
Home › Hyundai › 2012 › Equus Ultimate › Repair and Diagnosis › Restraints › Air Bag, SRS › Supplemental Restraint System Control Module (SRSCM) & Sensors › SRS Control Module (SRSCM) › Repair Procedures › Removal

Repair Procedures: Removal

  1. Remove the ignition key from the vehicle.
  2. Disconnect the battery negative cable and wait for at least three minutes before beginning work.
  3. Disconnect the DAB, PAB, SAB, CAB, KAB and BPT connectors.
  4. Remove the floor console. (Refer to the CONSOLE )
  5. Disconnect the SRSCM harness connector from the SRSCM.
    Fig 1: Identifying SRSCM And Harness Connector
    G08830789Courtesy of HYUNDAI MOTOR AMERICA
  6. Remove the SRSCM mounting bolts (4EA) from the SRSCM, then remove the SRSCM.
About FixVault