FixVault
Home › Hyundai › 2012 › Genesis 3.8 › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 3.8L › CVVT Oil Control Valve (OCV) › Repair Procedures › Removal › [CVVT Oil Control Valve (Exhaust)]

[CVVT Oil Control Valve (Exhaust)]

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the CVVT oil control valve connector (A).

    [Bank 1] 

    Fig 1: Identifying Exhaust CVVT Oil Control Valve Connector And Mounting Bolt (Bank 1)
    G08834216Courtesy of HYUNDAI MOTOR AMERICA

    [Bank 2] 

    Fig 2: Identifying Exhaust CVVT Oil Control Valve Connector And Mounting Bolt (Bank 2)
    G08834217Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the cylinder head cover (Refer to "CYLINDER HEAD ASSEMBLY " in EM group).
  4. Remove the installation bolt (A), and then remove the valve from the engine.

    [Bank 1] 

    Fig 3: Identifying Cylinder Head Cover Mounting Bolt (Bank 1)
    G08834218Courtesy of HYUNDAI MOTOR AMERICA

    [Bank 2] 

    Fig 4: Identifying Cylinder Head Cover Mounting Bolt (Bank 2)
    G08834219Courtesy of HYUNDAI MOTOR AMERICA
About FixVault