FixVault
Home › Hyundai › 2012 › Genesis 3.8 › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 3.8L › Injector Drive Box (IDB) › Repair Procedures › Removal

Repair Procedures: Removal

  1. Turn the ignition switch off and disconnect the battery negative (-) cable.
  2. Disconnect the injector drive box (IDB) connector (A).
  3. Remove the IDB assembly after removing the bolts (B) and the nuts (C).
    Fig 1: Identifying IDB Assembly Connector Mounting Bolts And Nuts
    G08834128Courtesy of HYUNDAI MOTOR AMERICA
About FixVault