FixVault
Home › Hyundai › 2012 › Genesis 5.0 › Repair and Diagnosis › Body & Frame › Door Locks › Smart Key System › Repair Procedures › Inspection › Antenna Status Check

Antenna Status Check

  1. Connect the cable of scan tool to the data link connector in driver side crash pad lower panel.
  2. Select the "IPM + PIC".
  3. After IG ON, select the "PIC ANTENNA STATUS CHECK".
    Fig 1: Display - PIC Antenna Status Check
    G08838386Courtesy of HYUNDAI MOTOR AMERICA
  4. Set the smart key near the related antenna and operate it with a scanner.
    Fig 2: Display - Bumper Antenna Screen
    G08838387Courtesy of HYUNDAI MOTOR AMERICA
    Fig 3: Display - PIC Antenna Status Check Screen
    G08838388Courtesy of HYUNDAI MOTOR AMERICA
  5. If the smart key runs normal, the related antenna, smart key (transmission, reception) and exterior receiver are normal.
  6. Antenna status
    1. INTERIOR ANTENNA 1
    2. INTERIOR ANTENNA 2
    3. BUMPER/TRUNK ANTENNA
    4. DRV_DR ANTENNA
    5. AST_DR ANTENNA
    6. REAR PACKAGE TRAY ANTENNA
About FixVault