FixVault
Home › Hyundai › 2012 › Genesis 5.0 › Repair and Diagnosis › Electrical › Starter › Button Engine Start System › PDM (Power Distribution Module) › Repair Procedures › Removal

Repair Procedures: Removal

  1. Disconnect the negative(-) battery terminal.
  2. Remove the crash pad lower panel (A). (Refer to "CRASH PAD ")
    Fig 1: Identifying Crash Pad Lower Panel
    G08838853Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the reinforcing panel (A).
    Fig 2: Identifying Reinforcing Panel
    G08838854Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the power distribution module (A) after loosening a bolt and nut.
    Fig 3: Identifying Power Distribution Module
    G08838855Courtesy of HYUNDAI MOTOR AMERICA
About FixVault