FixVault
Home › Hyundai › 2012 › Genesis 5.0 › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 5.0L › CVVT Oil Control Valve (OCV) › Repair Procedures › Removal › [CVVT Oil Control Valve (Bank 2)]

[CVVT Oil Control Valve (Bank 2)]

  1. Turn ignition switch OFF and disconnect the negative (-) battery cable.
  2. Disconnect the CVVT oil control valve connector (A-Intake) and (B-Exhaust).
  3. Remove the mounting bolt, and then remove the valve from the engine.
    Fig 1: Identifying CVVT Oil Control Valve Connector (Intake And Exhaust, Bank 2)
    G08822920Courtesy of HYUNDAI MOTOR AMERICA
About FixVault