FixVault
Home › Hyundai › 2012 › Genesis Coupe 2.0T, Automatic Trans › Repair and Diagnosis › Brakes › Traction Control › Electronic Stability Control (ESC) System › Front Wheel Speed Sensor › Repair Procedures › Removal

Repair Procedures: Removal

  1. Remove the connector after removing the front wheel speed sensor clip.
    Fig 1: Identifying Front Wheel Speed Sensor Clip
    G06509985Courtesy of HYUNDAI MOTOR CO.
  2. Remove the front wheel speed sensor. (Refer to FRONT AXLE ASSEMBLY )
  3. Installation is the reverse of removal.
About FixVault