FixVault
Home › Hyundai › 2012 › Santa Fe SE, AWD › Repair and Diagnosis › Body & Frame › Door Locks › Immobilizer System › Immobilizer Control Unit › Repair procedures › Replacement

Repair procedures: Replacement

  1. Disconnect the negative (-) battery terminal.
  2. Remove the crash pad.

    (Refer to the CRASH PAD .)

  3. Disconnect the 5P connector of the SMARTRA unit and then remove the SMARTRA unit (A) mounted on the left side cowl cross bar after loosening a shear bolt.
    Fig 1: Identifying Smartra Unit
    G06847956Courtesy of HINO MOTORS, LTD.
  4. Installation is the reverse of removal procedure.
About FixVault