FixVault
Home › Hyundai › 2012 › Santa Fe SE, AWD › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - G3.5 DOHC › Variable Charge Motion Actuator (VCMA) › Repair Procedures › Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Remove the intake manifold. (Refer to INTAKE AND EXHAUST SYSTEM .)
  3. Remove the installation bolts (A) and nut (B), and then remove the variable charge motion actuator.
    Fig 1: Locating Variable Charge Motion Actuator Bolts And Nut
    G06844961Courtesy of HYUNDAI MOTOR CO.
About FixVault