FixVault
Home › Hyundai › 2012 › Sonata GLS, Automatic Trans › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 2.4L (Except HEV) › Canister Close Valve (CCV) › Repair Procedures › Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the canister close valve connector (A).
  3. Disconnect the ventilation tube quick connector (B).
  4. Release the lever (C), and then remove the fuel tank air filter (D) after rotating it in the direction of the arrow in the figure.
  5. Release the lever (E), and then remove the canister close valve (F) after rotating it in the direction of the arrow in the figure.
    Fig 1: Identifying Canister Close Valve Connector, Ventilation Tube Quick Connector, Fuel Tank Air Filter And Canister Close Valve
    G07366129Courtesy of HYUNDAI MOTOR CO.
    Fig 2: Identifying Canister Close Valve Connector, Ventilation Tube Quick Connector, Fuel Tank Air Filter And Canister Close Valve
    G07366130Courtesy of HYUNDAI MOTOR CO.
About FixVault