FixVault
Home › Hyundai › 2012 › Sonata GLS, Automatic Trans › Repair and Diagnosis › External Pages › Different variant/trim › Section 47 (Smart Key System (HEV)) › Smart Key Unit › Repair Procedures › Removal › Trunk lid open switch

Trunk lid open switch

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the negative (-) battery terminal.
  2. Remove the trunk door trim.

    (Refer to the "TRUNK ")

  3. Remove the trunk lid panel after disconnecting the connector and loosening the mounting screws. (Refer to the "TRUNK LID ")
  4. Disconnect the trunk lid open switch connector (A).
    Fig 1: Identifying Trunk Lid Open Switch Connector
    G07318923Courtesy of HYUNDAI MOTOR CO.
  5. Remove the outside handle (A) from the trunk garnish after loosening the trunk outside handle mounting screws.
    Fig 2: Identifying Outside Handle With Mounting Screws
    G07318924Courtesy of HYUNDAI MOTOR CO.
About FixVault