FixVault
Home › Hyundai › 2012 › Tucson GL, Automatic Trans › Repair and Diagnosis › Electrical › Starter › Button Engine Start System › PDM (Power Distribution Module) › Repair Procedures › Removal › PDM (Power Distribution Module) Relay

PDM (Power Distribution Module) Relay

  1. Remove the negative (-) battery terminal.
  2. Remove the front seat heater switch module.

    (Refer to FRONT SEAT .)

  3. After removing the bolts (2EA) and connector, remove PDM relay box (A).
    Fig 1: Identifying Power Distribution Module Relay
    G06873853Courtesy of HYUNDAI MOTOR CO.
About FixVault