FixVault
Home › Hyundai › 2012 › Tucson GL, Automatic Trans › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System › Variable Charge Motion Actuator (VCMA) › Repair Procedures › Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the VCMA connector (A).
  3. Disconnect the engine coolant hose (B).
    Fig 1: Identifying VCMA Connector And Engine Coolant Hose
    G06872255Courtesy of HYUNDAI MOTOR CO.
  4. Remove the VCMA (A) after removing 3 installation bolts.
    Fig 2: Identifying VCMA
    G06872256Courtesy of HYUNDAI MOTOR CO.
About FixVault