Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.

Remove the coupling assembly. Refer to REMOVAL .
Remove the extension Cable (A).

Fig 1: Identifying Extension Cable
Courtesy of KIA MOTORS AMERICA, INC.
Remove the pressure sensor (A) with 24 mm socket.
CAUTION: Keep going horizontal state to prevent leaks during remove the pressure sensor.

Tightening torque: 7.8 ~ 9.8 N.m (0.8 ~ 1.0 kgf.m, 5.8 ~ 7.2 lb-ft)

Fig 2: Identifying Pressure Sensor
Courtesy of KIA MOTORS AMERICA, INC.