FixVault
Home › Hyundai › 2012 › Tucson GLS, 4WD › Repair and Diagnosis › Body & Frame › Door Locks › Smart Key System › Smart Key Unit › Repair Procedures › Removal › Smart Key Unit

Smart Key Unit

  1. Disconnect the negative (-) battery terminal.
  2. Remove the glove box housing.

    (Refer to the "Crash Pad ")

  3. After disconnecting the smart key unit connector (A), loosen the smart key unit mounting bolts, and remove the smart key unit (B).
    Fig 1: Identifying Smart Key Unit With Connectors
    G06875413Courtesy of HYUNDAI MOTOR CO.
About FixVault