FixVault
Home › Hyundai › 2012 › Tucson GLS, FWD › Repair and Diagnosis › Electrical › Starter › Button Engine Start System › Fob Holder › Repair Procedures › Removal

Repair Procedures: Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the floor console.

    (Refer to the CONSOLE .)

  3. Disconnect the connector (B), then remove the fob holder assembly (A) after releasing the hook (C).
    Fig 1: Removing Fob Holder Assembly And Releasing Hook
    G06873847Courtesy of HYUNDAI MOTOR CO.
    Fig 2: Identifying Fob Holder Assembly Connector
    G06873848Courtesy of HYUNDAI MOTOR CO.
About FixVault