FixVault
Home › Hyundai › 2012 › Veloster Automatic DCT Trans › Repair and Diagnosis › External Pages › Different car › Section 15 (Lighting System) › Rheostat › Repair Procedures › Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2014 Hyundai Veloster and 2013 Hyundai Veloster. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative (-) battery terminal.
  2. Remove the crash pad lower switch (A).

    (Refer to CRASH PAD "")

  3. Remove the crash pad side switch assembly (A).
    Fig 1: Identifying Crash Pad Side Switch Assembly
    G09135299Courtesy of HYUNDAI MOTOR AMERICA
  4. The installation is the reverse of removal.
    CRASH PAD SIDE SWITCH CONNECTOR DESCRIPTION

    Pin No. Connector
    LHD RHD
    1 ECO Ignition
    2 - ESC
    3 PAS ISG indicator
    4 PAS indicator ISG
    5 ISG PAS indicator
    6 ISG indicator PAS
    7 ESC -
    8 Ignition ECO
    9 Ground Rheostat Down
    10 Illumination (+) Rheostat Up
    11 - -
    12 Illumination (-) -
    13 - Illumination (-)
    14 - -
    15 Rheostat Up Illumination (+)
    16 Rheostat Down Ground
About FixVault