Repair Procedures: Removal

WARNING: This page is about a different car, the 2014 Hyundai Veloster and 2013 Hyundai Veloster. However, it is still accessible from the selected car via links, so may be relevant.

Turn the ignition switch OFF and disconnect the battery negative (-) cable.
Disconnect the CVVT oil control valve connector (A).
Remove the installation bolt (B), and then remove the valve from the engine.
[Bank 1/Intake]

Fig 1: CVVT Connector & Bolt (Bank 1/Intake)
Courtesy of HYUNDAI MOTOR AMERICA

[Bank 1/Exhaust]

Fig 2: CVVT Connector & Bolt (Bank 1/Exhaust)
Courtesy of HYUNDAI MOTOR AMERICA