FixVault
Home › Hyundai › 2012 › Veloster Standard Trans › Repair and Diagnosis › External Pages › Different car › Section 33 (MULTIFUNCTION Switch) › Repair Procedures › Installation

Repair Procedures: Installation

WARNING: This page is about a different car, the 2014 Hyundai Veloster and 2013 Hyundai Veloster. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the multifunction switch.
  2. Install the clock spring.
  3. Install the steering column upper and lower shrouds.
  4. Install the steering wheel.
    NOTE: Make sure the multifunction switch connectors are plugged in properly.
About FixVault