FixVault
Home › Hyundai › 2012 › Veloster Standard Trans › Repair and Diagnosis › External Pages › Different car › Section 36 (Immobilizer System) › Immobilizer Control Unit › Repair Procedures › Installation

Repair Procedures: Installation

WARNING: This page is about a different car, the 2014 Hyundai Veloster and 2013 Hyundai Veloster. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the immobilizer unit.
  2. Connector the immobilizer unit.
  3. Install the crash pad lower panel.
About FixVault