Cluster Replacement

NOTE:

When prying with a flat-up screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Put on gloves to protect your hands.

Tilt the steering column down.
After remove the cluster facia panel (A), disconnecting the trip sensor connector (B).

Fig 1: Identifying Cluster Facia Panel
Courtesy of HYUNDAI MOTOR CO.
After loosening the mounting screws, then remove the cluster (A).

Fig 2: Identifying Cluster
Courtesy of HYUNDAI MOTOR CO.
Installation is the reverse the removal.
NOTE:
- Make sure the connector is plugged in properly.