Repair procedures: Inspection

Turn ignition switch OFF and disconnect the negative (-) battery cable.
Remove the crash pad lower panel.
(Refer to "CRASH PAD ")
Remove the crash pad side switch assembly (A).

Fig 1: Removing Crash Pad Side Switch Assembly
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the ESC OFF switch connector (A).

Fig 2: ESC OFF Switch Connector
Courtesy of HYUNDAI MOTOR AMERICA
Check the continuity between the switch terminals as the ESC OFF switch is engaged.

Fig 3: Checking Continuity Between Switch Terminals
Courtesy of HYUNDAI MOTOR AMERICA