FixVault
Home › Hyundai › 2013 › Elantra GLS, Automatic Trans › Repair and Diagnosis › Brakes › Traction Control › Electronic Stability Control (ESC) System › Troubleshooting › Problem Symptoms Table › Inspection procedures › Problem verification

Problem verification

  1. Disconnect the connector from the ABS control module and turn the ignition switch ON.
  2. Does the ABS warning lamp light up?

    YES 

    • Inspect again after replacing the ABS HECU.

    NO 

    • Check the power source for the ABS warning lamp.
About FixVault