FixVault
Home › Hyundai › 2013 › Elantra GLS, Automatic Trans › Repair and Diagnosis › Electrical › Starter › Button Engine Start System › Start/Stop Button › Repair Procedures › Removal

Repair Procedures: Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the crash pad lower panel (A).
    Fig 1: Crash Pad Lower Panel
    G10244349Courtesy of HYUNDAI MOTOR AMERICA
  3. Disconnect the start/stop button connector (A).
    Fig 2: Start/Stop Button Connector
    G10244350Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the start/stop button (A) after pushing clips.
    Fig 3: pushing Start/Stop Button Clips
    G10244351Courtesy of HYUNDAI MOTOR AMERICA
About FixVault