Release Residual Pressure in Fuel Line
CAUTION:
There may be some residual pressure even after "Release Residual Pressure in Fuel Line" work, so cover the hose connection with a shop towel to prevent residual fuel from spilling out before disconnecting any fuel connection.
- Turn the ignition switch OFF and disconnect the battery (-) cable.
- Remove the rear seat cushion. (Refer to REPLACEMENT )
- Remove the service cover (A).
- Disconnect the fuel pump connector (A).
- Connect the battery (-) cable.
- Start the engine and let idle, and then turn the ignition switch OFF after the engine has stopped on its own.