FixVault
Home › Hyundai › 2013 › Elantra GT Automatic Trans › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System › Variable Charge Motion Actuator (VCMA) › Repair procedures › Removal

Repair procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the VCMA connector (A).
    Fig 1: Identifying VCMA Connector
    G09885965Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the VCMA (A) after removing 3 installation bolts.
    Fig 2: Identifying VCMA And Bolts
    G09885966Courtesy of HYUNDAI MOTOR AMERICA
About FixVault