FixVault
Home › Hyundai › 2013 › Equus Signature › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 5.0L › CVVT Oil Control Valve (OCV) › Repair Procedures › Removal › CVVT Oil Control Valve (Bank 2)

CVVT Oil Control Valve (Bank 2)

  1. Turn ignition switch OFF and disconnect the negative (-) battery cable.
  2. Disconnect the CVVT oil control valve connector (A-Intake) and (B-Exhaust).
  3. Remove the mounting bolt, and then remove the valve from the engine.
    Fig 1: Identifying CVVT Intake And Exhaust Oil Control Valve Connector (Bank 2)
    G08830278Courtesy of HYUNDAI MOTOR AMERICA
About FixVault