FixVault
Home › Hyundai › 2013 › Tucson GL, Automatic Trans › Repair and Diagnosis › Electrical › Starter › Button Engine Start System › PDM (Power Distribution Module) › Repair Procedures › Removal › PDM (Power Distribution Module)

PDM (Power Distribution Module)

  1. Disconnect the negative (-) battery terminal.
  2. Remove the main crash pad.

    (Refer to the CRASH PAD .)

  3. Remove the power distribution module (A) after loosening bolts (2EA).
    Fig 1: Identifying Power Distribution Module With Mounting Bolts
    G06873852Courtesy of HYUNDAI MOTOR CO.
About FixVault