FixVault
Home › Hyundai › 2013 › Veloster Base, Automatic DCT Trans › Repair and Diagnosis › Body & Frame › Door Locks › Smart Key System › Smart Key Unit › Repair Procedures › Removal › Exterior Bumper Antenna

Exterior Bumper Antenna

  1. Disconnect the negative (-) battery terminal.
  2. Remove the rear bumper.

    (Refer to "REAR BUMPER ")

  3. Disconnect the connector, then remove the rear bumper antenna (A) after loosening 2 screws.
    Fig 1: Identifying Rear Bumper Antenna And Mounting Screws
    G09134493Courtesy of HYUNDAI MOTOR AMERICA
About FixVault